Here are the steps to obtain the unlocked version of the Heated Madness Weapon blueprint.
The Kastov 762 Assault Rifle, popularly referred to as the Heated Madness Weapon, can be crafted by following the correct blueprint. We will provide you with a comprehensive guide to acquire this blueprint.
In order to acquire the vibrant Heated Madness assault rifle weapon blueprint, the initial step involves venturing into DMZ’s newly introduced Koschei Complex exclusion zone. This covert area is concealed beneath Al Mazrah, and we have a comprehensive guide detailing the various methods to gain access to this underground location.
Once inside, your objective is to locate and successfully extract five weapon parts. It is not mandatory to extract all the parts within a single DMZ match, but you must collect all of them before the blueprint can be unlocked.
Fortunately, the progress made in obtaining these weapon parts is shared among your teammates. This means that if one squad member successfully extracts a weapon part, everyone in the squad will also receive credit toward unlocking that specific component.
Here is where to find the Heated Madness Weapon Parts:
Barrel skin:
The barrel can be found by entering Koschei Complex through any door and solving the riddle in the room to get to the Chemical Plant area of the structure. Near the room’s center, inside one of the vents that you can crawl through, is this piece.
Optic Skin:
You’ll require the rebreather gear for this. Don’t try to loot the item until you’ve scavenged this. Entering Koschei Complex from the Taraq/Al Mazrah bridge position will lead you to the optic. You must complete the first half of the swimming puzzle before moving on to part two, which is at the surface.
To do this, choose the right side path. Keep an eye out for tripwires and AI foes here. The path will split once more, but keep to the far right to find a boarded-up hole in the wall. Break through the opening and use the rebreather that is equipped to dive into the flooded room. Continue swimming straight until you come to a pair of doors. The room’s back left corner is where the optic is located.
Magazine Skin:
You’ll want to make sure you have a gas mask for the magazine. You must enter the Oasis entry point and then move on to the room with the gas puzzle. You want to enter the gas-filled bunker with the long gas tanks on the left when you reach the last section (designated as section 1 on the map). It’s behind the tanks at the back.
Muzzle skin:
You should use Rohan Oil, as well as snag a spare car battery and some jumper cables. To progress, you’ll need one set to power up a different bunker door and another set to reach the Chemical Plant. Grab an R4D detector once you are inside the Chemical Plant; they are easily lootable in one of the rooms. To get to door C2, head south in the Chemical Plant.
Then, after passing through the doors (the location is known as Alpha Clusters), continuing straight down the hall, and climbing the steps, you must power it up. From there, you can enter another big room.
Find a door with three glowing symbols with the R4D. Next, check the blackboards all around the room with the R4D detector. There are more than four, so you must locate the ones that correspond to your symbols, make a note of the numbers that correspond to the symbols, and then use the muzzle piece to unlock the room using the door code.
Tip: Finding all three symbols can be challenging. Despite only being able to locate two of mine, I utilized the method of elimination to determine the third keypad number. Multiple guesses do not result in lockout.
Grip Skin:
The muzzle is by far the most time-consuming and difficult component to locate, but you can attempt to locate the grip concurrently because it is located in the same region of the Alpha Clusters as the muzzle. You’ll need to locate three AQ laptops for this piece. You can find these on your excursions in Koschei Complex because they are common loot that has been scavenged around the map.
Three servers are perched on a pedestal in Alpha Clusters with a notice indicating they are dormant. A door nearby will start to open as soon as you interact with the servers to connect all three laptops. The grip and other valuable stuff are located in the unlocked chamber.
How to go about building the Heated Madness blueprint:
In the game’s menu, go to the Challenge area, scroll to the DMZ tab, and choose the Heated Madness challenge to view your unlock progress. You can enter the Gunsmith and choose the Kastov 762 assault rifle after you have all the pieces.
You’ll find the weapon skin pieces in the attachment areas, and you’ll need to equip them similarly. For instance, the optic skin for Heated Madness is listed under attachments. Utilize all five, and the blueprint will be useful.
There you have it folks to acquire the blueprint to craft this iconic weapon follow the easy steps above.