Get the optimal console and keyboard settings for “The Finals”
Do you need the optimal configurations for The Finals to raise your winnings? Since The Finals is a competitive shooter game, the majority of players will prioritize convenience features like quick input over stunning visuals. You’ll have a competitive advantage whether you’re playing The Finals on a PC or a console if you use the suggested settings listed below.
Are you prepared to increase your FPS and decrease your shadow quality?
Here are the optimal settings for The Finals, including keyboard and mouse, PlayStation, and Xbox:
- Use Enemy team colours: on
- Crosshair width: 1 or 2 is enough.
- Outline width: 1 to 4 should improve visibility. Avoid making the outline too thick if you plan to use bright crosshair colors as this could cause the center dot to become black.
- Crosshair colour: If you want the crosshair color to stand out, drag one of the bars down to zero. As the image above illustrates, you will get a strikingly visible crosshair if you set red, blue, and green to 255 and decrease green to 0. Keeping green at 255 and reducing the others to 0 is another excellent option in bright green.
- Outline colour: it’s typically best to keep it black if you’re already using the colours mentioned above. Of course, you can also go for a black crosshair and use a colourful outline instead.
- Center dot: on.
- Center dot radius: 1 to 6 is best. It should be large enough to see what you’re aiming at without getting in the way of precise aim.
- Opacity: 100.
For an optimal competitive resolution in The Finals, it’s crucial to decrease it to the maximum extent possible without compromising visibility excessively. If the screen appears excessively blurry, making it challenging to identify opponents, it is advisable to raise the resolution.
As previously stated, ensure you assess the effects of the resolution scaling options. While there isn’t a direct option to disable this setting entirely, setting DLAA or TAAU to 100 essentially achieves that. When you access your video settings in-game, you’ll find your FPS displayed in the top right corner of the screen – a higher number indicates better performance.
- Window mode: fullscreen.
- Resolution: 1920 x 1080 or above. Anything lower may hurt enemy visibility too much.
- VSync: disabled.
- Nvidia Reflex Low Latency: if it works for your setup, turn it on.
- Resolution scaling method: The best results were achieved by NVIDIA DLSS and TAAU, but since this greatly depends on your system, it’s best to play a game or use the testing grounds to see the differences for yourself.
- Resolution Scale: Anything less than ultra performance, such as DLSS or DLAA, will significantly blur your surroundings. When employing TAAU: 100.
- Field of view: Maintain 100. You really don’t want to restrict your vision when playing The Finals because it will make it harder for you to spot the enemy, even though it will affect your GPU and CPU rendering.
- Motion blur: disabled.
- Lens distortion: disabled.
- Ray tracing: static (this is the lowest setting).
Achieving the optimal competitive resolution in The Finals involves minimizing it to the extent possible without compromising visibility. If the screen becomes overly blurry, making it challenging to identify opponents, it is advisable to increase the resolution.
Additionally, as noted earlier, it is important to evaluate the effects of the resolution scaling options. While there is currently no direct option to completely disable this setting, using DLAA or TAAU set to 100 essentially accomplishes that. When accessing your video settings in-game, observe your FPS displayed in the top right corner of the screen – a higher number signifies better performance.
The lowest-quality options are usually the best settings for The Finals. It’s safe to forgo some of these, like effects and shadows, in favour of higher frames per second. However, be mindful of view distance and textures, as they greatly affect the visibility of enemies. Maintaining your focus and attention to detail is important when surveying your surroundings.
- Mouse sensitivity: This is subjective, but ensure it’s swift.
- Mouse zoom sensitivity multiplier: 100%.
- Mouse focal length sensitivity scaling: on.
- Mouse invert vertical look output: off. This swaps the direction of view: if you move your mouse to the left, you’ll look to the right and vice versa. Not useful to most players.
Optimal mouse settings for The Finals are subject to personal preference, but the suggested configurations above provide a recommended starting point. Ideally, set your mouse sensitivity high enough to achieve a 360-degree turn in one full swipe across your mousepad without experiencing any drag. It should be fast yet precise for accurate aiming.
For efficient gameplay, the fastest mouse zoom sensitivity is usually preferred to minimize time spent identifying enemies. Equally crucial is the mouse focal length sensitivity scaling, which adjusts sensitivity based on the field of view, particularly when zooming in. While you can experiment with this setting, enabling it generally enhances the natural feel of gameplay.
Additionally, the menu allows for customization of keybindings if desired. The default options are standard for a shooter, so there’s no necessity to make changes unless you prefer a different setup.
- Look sensitivity: Try a few things, but think about setting the horizontal sensitivity a little bit higher.
- Zoom sensitivity: When zooming in, you don’t want to give up too much speed, so set the zoom level to 100 or slightly less.
- Focal length sensitivity scaling: on.
- Horizontal/vertical look boost: If you want to look in the same direction for longer while accelerating your speed, increase the horizontal look boost. There’s no need for the vertical one.
- Look boost ramp-up time: the duration of time before look boost acceleration begins. This ought to take no more than 0.5 seconds, minimum.
- Zoom horizontal/vertical look boost: similar to the regular look boost, but with a closer look. Maintain a slow speed while still being quick enough to “track” distant players.
- Zoom look boost ramp-up time: keep it at 0.5 seconds or make it a bit slower.
- Aiming/movement inner dead zone: Increase this only in the event that your controller experiences drift, or uncontrollable movement.
- Invert vertical look input: changes your direction; that is, moving your character to the left with the thumbstick will move them right, and vice versa. Most players ought to leave it turned off.
- Look response curve: decides how your input will cause the crosshair to behave. Use exponential if you don’t want to experiment.
- Look acceleration: If you’re using look boost, keep it at a low level or turn it off entirely.
- Aim assist: Turning on all of the aim assist options in The Finals is highly recommended.
The optimal sensitivity settings for controllers in The Finals depend on personal preference. However, it is strongly advised to set the horizontal sensitivity to an extra fast level to facilitate quick turns. Additionally, to enable swift 360 turns, increase the horizontal look boost.
When it comes to look boosts, they are generally preferable over general look acceleration. With look boosts, you can customize values for both horizontal and vertical movement, as well as ramp-up times. Only consider increasing look acceleration if you prefer not to deal with look boost settings. Regarding the look response curve, this is a highly individualized setting, so it’s recommended to experiment. Start with exponential (the default, which feels more natural compared to linear), and try sinusoidal for comparison.
Lastly, it’s advisable to enable aim assist to enhance game control. This proves to be one of the best settings for The Finals players on controllers, especially in crossplay scenarios where it can be challenging without it.
- Music volume: lowered or turned off completely.
- SFX volume: 100.
- Dialogue volume: around 50. These are the character voices.
- Voice chat: Keep it turned on if you want excellent teamwork.
Sound effects encompass the noises generated by your opponents, making it crucial to hear them clearly. To ensure that nothing obscures the SFX, consider lowering or even turning off the music entirely. Characters may occasionally shout useful information, so it’s advisable to keep the dialogue volume at an audible level—although a slight reduction might be beneficial.
Undoubtedly, one of the key settings for The Finals is the voice chat. None of the recommended settings in this list significantly impact the game without effective team play, so ensure you can communicate seamlessly with your allies.
Conclusively, The Finals offers accessibility settings that may prove beneficial. The colorblind mode features schemes for deuteranopia, tritanopia, and protanopia. Additionally, you can activate subtitles and modify crosshair colors in the accessibility menu, although the crosshair options mirror those in the gameplay menu.